Free Tool · Updated 8 October 2026

CTR Calculator: Work Out Your Click-Through Rate and What It Saves You

Enter your impressions and clicks to get your click-through rate, or work backwards to the clicks or impressions you need. Then add your CPM to see how a better CTR lowers what you pay for every click.

What do you want to work out?
Your numbers
What your CTR does to cost per click

The figures loaded are an example ad, not a benchmark. Replace them with your own.

Your click-through rate 1.00%

500 clicks from 50,000 impressions.

Cost per click now ?$1.50at your CTR and CPM
Cost per click at 1.50%$1.00same CPM
Clicks per $1,000 now ?667at your CTR
Clicks per $1,000 at 1.50%1,000same CPM
Cheaper clicks

Cost per click at every CTR

How Much Each Click Costs as Your CTR Changes

The line shows your cost per click at each click-through rate, holding your CPM where you set it. Move along it to see the price of a click and how many clicks each 1,000 of ad spend buys.

The full guide

Click-Through Rate, Explained

In this guide

    What Is CTR?

    Short answer

    CTR (click-through rate) is the share of people who click your ad out of everyone it was shown to. It is clicks divided by impressions, shown as a percentage. An ad shown 10,000 times that gets 120 clicks has a CTR of 1.2%.

    CTR tells you how well an ad earns attention and gets people to act. A low CTR usually means the ad is not stopping the right people, or the offer is not clear enough to make them want to see more. A high CTR means the ad is doing its job of getting people to your site. Whether those people then buy is a separate question, which is why CTR is always read alongside cost per sale.

    CTR also matters for cost. On Meta you mostly pay for impressions, so every extra click you get from the same impressions makes each click cheaper. The calculator above shows exactly how much.

    How to Calculate CTR: The CTR Formula

    CTR = clicks ÷ impressions × 100

    If your ad was shown 50,000 times and got 500 clicks, your CTR is 500 ÷ 50,000 × 100 = 1.0%.

    The same formula rearranges to answer the other two questions people ask:

    Clicks = impressions × CTR ÷ 100

    Impressions needed = clicks ÷ (CTR ÷ 100)

    So at a 1.5% CTR, 20,000 impressions should bring about 300 clicks, and 300 clicks at a 1.5% CTR needs about 20,000 impressions. Pick “Clicks” or “Impressions” at the top of the calculator to work these out.

    Use the same kind of click on both sides. On Meta that means Link clicks and Impressions for link CTR. Mixing Clicks (all) with a link click rate is the most common reason two people get different answers from the same account.

    How CTR Changes Your Cost Per Click

    Short answer

    When you pay for impressions, cost per click equals CPM divided by the clicks you get from every 1,000 impressions. Double your CTR at the same CPM and each click costs half as much.

    CPC = CPM ÷ (1,000 × CTR)

    Here CTR is written as a decimal, so 1% is 0.01. CPC means cost per click; CPM means cost per 1,000 impressions. The table shows the same 50,000 impressions bought at an example CPM of $15, so the spend is $750 on every row. Only the CTR changes.

    CTRClicksCost per click ?Clicks per $1,000 ?
    0.5%250$3.00333
    1.0%500$1.50667
    1.5%750$1.001,000
    2.0%1,000$0.751,333

    For example, lifting CTR from 1.0% to 1.5% at a $15 CPM cuts the cost per click from $1.50 to $1.00, a third cheaper. The same budget now buys 50% more visitors. If your site converts those visitors at the same rate, your cost per sale falls by a third too.

    This is why creative testing pays. A better ad does not just get more clicks, it makes every click cheaper. To see what your CPM is, use our CPM calculator. To turn cost per click into what you can afford, use the CPC calculator.

    CTR (All) vs CTR (Link Click-Through Rate) in Meta Ads

    Short answer

    CTR (all) counts every kind of click on your ad, including likes, comments, profile clicks and opening a photo. CTR (link click-through rate) counts only clicks on links to your chosen destination. Link CTR is the one that tells you how many people headed to your site.

    Meta Ads Manager reports several click-through rates, and they can be far apart for the same ad. Meta’s own definitions:

    CTR (all)

    Clicks (all) divided by impressions. Clicks (all) includes link clicks, clicks to your Page or profile picture, post reactions, comments, shares, and clicks to expand a photo or video to full screen.

    CTR (link click-through rate)

    Link clicks divided by impressions. A link click is a click on a link in the ad that leads to the destination you chose, such as your website or an Instant Experience.

    Take an ad with 50,000 impressions, 500 link clicks and 400 other clicks such as likes and profile taps. Its CTR (all) is 900 ÷ 50,000 = 1.8%. Its link CTR is 500 ÷ 50,000 = 1.0%. Only the 500 link clicks had a chance to visit your store.

    Two more versions are worth knowing:

    • Outbound CTR counts only clicks that take people off Facebook and Instagram, for example to your website. Link clicks can also include destinations inside Meta, such as an Instant Experience.
    • Unique CTR divides unique clicks by reach (people) rather than impressions, so one person clicking three times counts once.

    For an ecommerce brand sending traffic to its store, link CTR or outbound CTR is the number to watch. CTR (all) can make an ad that gets lots of likes look strong when few people actually went to the site.

    What Is a Good CTR for Facebook Ads?

    Short answer

    There is no single good CTR. The best benchmark is your own account: compare link CTR between ads shown to the same kind of audience in the same placements, and judge every ad on its cost per sale as well. A “good” CTR is one that beats your other ads and still brings buyers.

    Published averages mix brands, countries, offers and ways of counting clicks, so they say little about your ads. CTR moves a lot with things that have nothing to do with how good the ad is:

    • Audience. People who already know your brand, such as past visitors and customers, tend to click more than people seeing you for the first time.
    • Placement. Feed, Stories, Reels and other placements behave differently. Breaking results down by placement often shows very different CTRs inside one ad set.
    • Campaign goal. A campaign set to get traffic is shown to people likely to click. A campaign set to get purchases is shown to people likely to buy, who may click less often.
    • Format and offer. Video, single image and carousel ads draw clicks differently, and a sale or new launch can lift CTR on its own.
    • Which CTR you read. CTR (all) is always higher than link CTR, so two people quoting “our CTR” may be quoting different numbers.

    How to Judge Your CTR

    1. Use link CTR (or outbound CTR), not CTR (all).
    2. Compare like with like: new-customer ads with new-customer ads, Reels with Reels.
    3. Build your own baseline from your ads over the last few months. Note what your best ads reached, and use that as the bar for new ones.
    4. Watch the trend. When an ad’s CTR slides while its frequency (how often each person has seen it) climbs, people are tiring of it.
    5. Check what happens after the click. A high CTR with a poor conversion rate can mean the ad promises something the page does not deliver.

    CTR on Meta vs Google Ads

    Google Ads calculates CTR the same way: clicks divided by impressions. The context is different, so the numbers are not comparable.

    Google search ads

    The person typed a search and is already looking for something. A relevant ad can draw a large share of clicks. You usually pay per click, so CTR affects cost through Google’s ad quality ratings rather than directly.

    Meta ads

    The person is scrolling for something else, and your ad interrupts them. Clicks are harder to earn. You usually pay per impression, so CTR feeds straight into your cost per click.

    Compare CTR within one platform, never across them. A Google search CTR next to a Meta feed CTR tells you about the platforms, not about your ads.

    Common Mistakes

    • Reading CTR (all) as traffic. Likes and profile taps inflate it. Use link CTR to judge how many people went to your site.
    • Chasing CTR on its own. Clickbait gets clicks from people who never buy. Judge ads on cost per sale first, CTR second.
    • Comparing across audiences and placements. A retargeting ad and a new-customer ad will never have the same CTR. Compare within each.
    • Judging too early. A CTR from a few hundred impressions can swing wildly. Wait until each ad has had enough impressions for the number to settle before you pick a winner.
    • Forgetting the CPM. A higher CTR on a much more expensive audience can still mean dearer clicks. The calculator shows both together for this reason.

    FAQs

    How do you calculate CTR?

    Divide clicks by impressions and multiply by 100. An ad with 500 clicks from 50,000 impressions has a CTR of 1%.

    What is a good CTR for Facebook ads?

    There is no universal figure, because CTR changes with audience, placement, campaign goal and which CTR you read. Compare link CTR against your own best ads shown to similar audiences, and check that the clicks turn into sales at a cost you can afford.

    What is the difference between CTR (all) and link CTR on Facebook?

    CTR (all) counts every click on the ad, including reactions, comments, shares, profile clicks and expanding media. Link CTR counts only clicks on links to your chosen destination. For ecommerce, link CTR is the one that reflects traffic to your store.

    How do I calculate clicks from CTR and impressions?

    Multiply impressions by CTR and divide by 100. At a 1.5% CTR, 20,000 impressions gives about 300 clicks.

    Does a higher CTR lower my cost per click?

    Yes, when you pay for impressions, as most Meta campaigns do. Cost per click equals CPM divided by (1,000 × CTR), so at the same CPM, a 50% higher CTR makes each click a third cheaper.

    Why is my CTR high but I get no sales?

    Check three things. First, that you are reading link CTR, not CTR (all). Second, that the page people land on matches what the ad promised. Third, that the ad is reaching people who can buy, not just people who like to click.

    Is CTR a percentage?

    Yes. CTR is a ratio of clicks to impressions, normally shown as a percentage. A CTR of 0.012 is the same as 1.2%.

    Want Ads That Earn the Click?

    Above and Beyond Digital builds and runs Meta ads for ecommerce brands across Australia, New Zealand, North America and Europe. We test creative against cost per sale, not just clicks. If you would like us to look at your ads, send us a message.

    Sources, checked 7 October 2026: Meta Business Help Centre, CTR (link click-through rate), CTR (all), Clicks (all) and link clicks vs outbound clicks. Google Ads Help, Clickthrough rate (CTR). The example ad’s figures are illustrative only, not benchmarks. Related tools: CPM calculator, CPC calculator, break-even ROAS calculator.